A: Since a LED light strip is fixed in length and it is not always possible to buy light strips of a suitable length every time, users have often asked if a light strip can be cut to a fixed length. Actually, there are many brands and products of LED light strips, so whether a light strip can still be used normally after being cut is not a question that can be given a general answer. It really depends on the specific product. In general, if the light strip has a cut line, it can be cut; if it has not, it is best not to cut it.

Part 1. How to Cut LED Strip Lights

Part 2. How to Fix LED Strip Lights When Cut

Part 3. How to Use LED Strip Lights After Cutting

Part 1. How to Cut LED Strip Lights

Before cutting light strips, please make sure that the strip you bought can be cut; otherwise, cutting the light strip may render it unusable; at the same time, you must remember to disconnect the power; directly cutting a light strip that is connected to a power supply is extremely dangerous.

Step 1. Measure the length

If the LED light strip you bought is too long, you need to cut off the extra part. The first thing you should do is measure the right length. If you accidentally cut the strip too short, your effort will be wasted.

Step 2. Look for the scissors logo on the light strip

For the convenience of users, manufacturers have placed a scissors logo on the cuttable part of their LED light strips. To avoid causing damage, you must find the scissors logo before cutting.

Step 3. Cut with a pair of scissors

The final step is to use your scissors and cut the excess strip along the position marked by the scissors logo. If you accidentally cut diagonally, it may cause the light to stop working, so make sure you cut straight.

Part 2. How to Fix LED Strip Lights When Cut

Q: I purchased a LED strip lights and used a portion of it, but I also want to use the remaining portion. Is that possible?

A: If the LED light strip you purchased can be cut, the remaining part that you have cut off cannot be used anymore. If you want to reconnect them after cutting, you must use an additional 4 pin connector to reconnect. However, if the operation is improper when you cut and connect, it may also cause the light strip to stop working properly. So we recommend that you double-check the length of the strip before cutting and avoid the need to reconnect after cutting.

If you need to reconnect LED light strips after cutting them, you need an additional 4pin connector. Generally, this product is not included in a LED light strip set and has to be purchased separately.

Step 1. Buy Lepro 4-pin LED strip light connector

There are many types of strip light connectors, so you need to choose the right one according to the type of light strip. If your light strip is 10mm wide, the 4Pin connector you select must be suitable for 10mm. If your light strip is 8mm wide and you purchase a 10mm connector, it will not work. Yet, the 4pin connects are the most commonly used. Lepro 4-pin strip light connector pack includes 5 pieces of L-shape and 5 pieces of line shape connectors, perfect for both 90° corners connection and extension along a straight line, can be used on almost all the occasions.

Step 2. Open the connector

If the connector has a cover, you have to open the connector on the side.

Step 3. Place the light strip into the connector

Place the two cut ends of the LED light strip into the fastening clips of the connector. At this point, you should check that they are not reversed by following the picture instruction.

Step 4. Cover the connector

After placing the light strip, close the cover of the connector and try to see if the light strip is lit normally after the power supply is connected. If the connected parts do not light up normally, try adjusting the connecting point between the connector and the light strip.

In general, it is somewhat troublesome to reconnect the strip after cutting. Not only do you have to buy additional connectors, but any improper operation may also cause the strip to become unusable. So it is best to make sure that the required length is correct and avoid wastage.

Part 3. How to Use LED Strip Lights After Cutting

Q: Does a cut LED light strip still work?

A: Some light strips can be cut to a specific length and continue to work. However, they must be cut according to the cut mark. There are some tiny and precise parts on LED light strips. If you accidentally cut the wrong place, you may cause the light to stop working normally.

After cutting the light strip, you can place the required parts in the proper position and turn on the lights by following to these steps. The following steps use Lepro LED light strips as an example:

Step 1. Make sure the wall is dry and clean

If you need to attach the light strip to a wall, please clean the wall first. If the wall is dusty or wet, you cannot attach the LED light strip properly.

Step 2. Paste the LED light strip

After cleaning the wall, you can tear off the covering on the 3M super glue behind the light strip and paste it in the position you want.

Step 3. Connect the LED light strip

If you have purchased a LED light strip set, it should come with a connector and a controller. You should use the connector to connect the light strip and the controller. When connecting the light strip and the connector, please pay attention to the front and back. If the light strip is inserted backward, it will not work properly.

Step 4. Plug in the power and turn on the LED light strip

The last step is to connect the controller to the power supply, and you should see the LED light strips turned on.

After performing the above steps, if you find that the LED light strip is still not lit, check that there is no connection issue. If the set-up is normal, it means the light strip may have been damaged during the cutting process, so be careful and always cut according to the logo on the strip. 

The post Can You Cut LED Light Strips appeared first on Lepro Blog.

Before the installation guide let’s take a quick tour of the key features of LED strip lights. So, you can decide which LED strip lights work best for you.

Part 1. Magic Features for Ceiling LED Strip Lights from the Latest Technology

Part 2. Common Key Features of Ceiling LED Strip Lights

Part 3. How to Install LED Strip Lights on Ceiling

Part 4. Recommend Lepro LED Strip Lights for Ceiling

Part 1. Magic Features for Ceiling LED Strip Lights from the Latest Technology

1. Dreamcolor or Single Color

The versatility of the ceiling LED strip lights is one of its key features and that’s why it comes in different shades of white if you choose a single-color LED strip light. However, if you choose multiple colors of LED strip lights then it comes in different colors (typically red, green, blue, RGB).  Meanwhile, if you choose RGB LED lights strip with built-in IC, you will see the lights display multicolors at any one time, like a rainbow, which is the so-called dreamcolor. With this dreamcolor feature, you will find colorful light throughout your entire home.

2. Music Sync

With a built-in microphone inside the smart LED strip, the light strip can sync with any music in your room. When the party is just starting, dim the lights and turn on some music, and you will get an amazing party time. Generally, there are multiple music modes available, and you can select the one you wish.

3. Multiple Ways of Control

Different types of LED strip lights vary in their control methods. Basically, you can get a remote controller to turn the lights on and off, change colors, and brightness, etc. Some LED strip lights are also compatible with Amazon Echo, Google Home Mini, Dot, etc., which makes it possible to control the lights with your voice. There are even some types that allow you to control everything via APP, that is to say, you can change the colors, brightness, or scene modes anywhere and anytime with this WIFI wireless control.

Part 2. Common Key Features of Ceiling LED Strip Lights

1. Brightness

Like incandescent bulbs, brightness is the key feature of ceiling LED lights strip. The brightness of an LED strip light is described in lumens per meter. The brightness of LED strip lights depends on the following factors:

• LED output
• Number of LEDs per meter
• The wattage of LED strip lights

Typically, the brightness of the LED strip is 1500 lumens per meter which is less than a fluorescent lamp that has 1800 lumens per meter. If you choose a ceiling LED strip light that has more LED emitters per meter then it may cost more and be brighter.

2. Dimmable

If you have an interest in experiencing variable light levels, you should keep your eye on the dimmable feature. The LED strip lights are dimmable, and the brightness of those ceiling LED strip lights can be adjusted. The dimmable feature are adjusted to the appropriate DC electrical signals.

3. Safety and Warranty

It is not feasible for us to frequently change LED strip lights on the ceiling, so it’s important to choose those with a high-quality. Before purchasing, you’d better check that the safety and warranty are right.

Part 3. How to Install LED Strip Lights on Ceiling

After selecting the best fit for your living space I will guide you through installing LED strip lights around a ceiling.

This involves the following steps.

Step 1. Choose the Best LED Strip Lights for Ceiling

Before buying LED lightning ceiling strips always keep in mind their key features. LED lighting ceiling strips come in various wattages which usually vary from 5 watts to 25 watts. And the different LED lights have a different number of emitters per meter which determines the brightness of the LED strip lights for ceiling. However, it’s your choice regarding other features like the selection of colors and depends on your living space.

But always keep in mind that the LED strip width should not be more than the width of the space where you want to hang it. LED strip light ceiling installation can be tricky as you need a sophisticated technique and equipment to hide the LED light strip in a false ceiling.  Choose the best size that fits your need and accommodates the height of the ceiling. For a living space, 4″ or 7″ fixtures work well but it also depends on other factors such as the size of the area you want to light. It also depends on how far the ceiling is from where you light.

But once you choose the best fit for your living space then the next step is cleaning your ceiling.

Step 2. Keep the Ceiling Surface Clean and Dry

Generally, you should clean and dry your ceiling before installing LED strip lights to make sure it can be pasted.

Step 3. Open the LED Tape

All LED strip lights have an adhesive at the back of tape for easy installation. You can easily cut the LED strip to various lengths for easy installation. Here you should make sure to cut off the excess at the cuttable mark.

Step 4. Hide LED Light Strips in the Ceiling

Installing LED strip is very easy but if you are installing the strips in the ceiling you may need a lip to hide the LED strips. So, install the LED lightning ceiling strips behind a lip such as at the top of a molded or an edge of a drop-down ceiling. This will help you to hide the ceiling LED strips lights and provide the best lighting effect in the living space for a much sleeker look.

Step 5. Connect LED Strip Lights in Ceiling to the Power Supply

You need a compatible driver and compatible LED connector wire to connect the LED strip lights to the power source. You can buy a LED strip light kit that has everything in it. Once you’ve all the accessories you can connect the LED strip to the connector wire in such a way that the red wire connects to the positive sign of the strip and the black wire with the negative sign.

Now close the clasp by pressing the connector clip. Then you only need to connect the other end of the connector wire to the driver and plug the driver into the main power supply and switch on the power button. You are good to go, and you have successfully installed it around the ceiling, and you have also hidden the strip lights in the ceiling.

Check the Videos about How to Install LED Strip Lights

Part 4. Recommend Lepro LED Strip Lights for Ceiling

Lepro provides various types of LED strip lights, such as WIFI smart LED strip lights working with Alexa Google Home, music sync RGB LED strip lights, waterproof LED Strip Light Kits, and so on. If you are looking for decorations for your false ceiling, just have a check and find the right one. With Lepro LED strip lights, you can do exactly what you want. Even the price of the product is reasonable and has a lot of features that other brands don’t even provide.

The post How to Choose the Best Ceiling LED Strip Lights appeared first on Lepro Blog.

LED tube lights are popular in home and businesses. This article descripes how to install ballast bypass T8 LED tube lights. If you want to know why choose type B ballast bypass LED tube lights, please read article how to convert fluorescent tube to LED.

Consider Your Safety before Installation

Please kindly note: installation of LED tube lights can be dangerous since you’re working with electricity. If you’ve never performed electrical tasks before, consider working with a knowledgeable partner throughout this process.

There are two kinds of type B LED tubes, which are single ended power and double ended power LED tube. Single ended power LED tube need rewire, but it’s cheaper. Double ended power LED tube can work directly on fluorescent light fixture after remove ballast.

How to Install Single-Ended Power LED Tube Lights?

1. Disconnect main power before installation.
2. Cut the output wires on the ballast. You can either remove the ballast or keep it, it’s not useful in this case anyway.
3. Use a non-shunted lamp holder, and connect the N and L wires of the mains to the N and L ends of the lamp holder.
4. Install the bracket and the lamp.
5. Power up

How to Install Double Ended Power LED Tube Lights?

1. Disconnect main power before installation
2. Cut the output wires on the ballast. You can either remove the ballast or keep it
3. Connect the N and L wires to the mains with the 2-terminal lamp holder input wires
4. Install the bracket and the lamp
5. Power up

Hope the article help. Click to find more info about LED tube lights.

The post How to Install T8 LED Tube Lights – Type B Ballast Bypass appeared first on Lepro Blog.

How to Install 120V LED strip lights? Following 3 steps are easy to follow

1.Take out LED strips from the package

2.Fix the light strip to placement you want by clips in the package. We recommend that using clip every 3ft. Please do not cover LED.

3.Plug and play.

Done. Now if you buy RGB LED strips, you can choose color by remote controller. Is it easy to follow?

Please kindly note: current version of 110V LED strip light can not be cut. We will release new version which can be cut in late 2020.

Hope the guide helps.

The post How to Install 120V LED Strip Lights – Easy to Follow 3 Steps appeared first on Lepro Blog.

Solar security lights are very popular, which can save energy and your effort to manually turn it on/off. Besides, it’s easy to install as follows:

3 Steps to Install LED Solar Security Light with Motion Sensor

Step 1. Turn the switch on

After the switch is turned to the “ON” position, the wall light only illuminates when the ambient light level is below 20 Lux and there is human movement detected.

Step 2. Choose a location exposed to direct sunlight

Recommended height: 6 – 8ft (1.8 – 2.5m). The number of uses depends on the amount of electricity stored during the daytime, which is affected by the intensity and duration of sunlight.

If the light fails to light up after days of continuous rainy or cloudy weather, it is because the battery has been exhausted. The light will function normally again at night after a sunny day.

Step 3. Fix the light

Make a punch mark on the surface to be installed. punch a hole with the impact drill, put in the concrete anchors and then fix the lamp with screws.

Tips: Temperature affects the sensitivity of the PIR sensor, causing the detection range to vary. The higher the temperature is, the shorter the detection range will be.

There are several models of solar flood lights with motion sensor, check the category to learn more.

The post How to Install Solar Security Light – Easy 3 Steps appeared first on Lepro Blog.

LED ceiling lights are necessary for the most of families. If hire electrician to install, it usually takes over $100. Now you can save $100 by following the video or article installation guide.

How to install flush mount ceiling lights?
At first, please make sure you get Installation tool. Then, please follow the guide
1. Pull the bracket lock to take off the mounting bracket.

2. Fix the mounting bracket to the ceiling.
2.1 For concrete and stone ceilings, first drill 2 holes, the distance between the holes for this lamp should be 45-70mm. Please check your product manual for details. Put in the concrete anchors and then fix the mounting bracket with screws.
2.2 For wooden ceilings, just use a screwdriver to fix the mounting bracket.

3. Add anti-scratch pads to the back of the lamp body.

4. Open the light’s waterproof wiring compartment.

5. Insert the wires into the electrical connections N and L accordingly.

6. Straighten out the wire, put the rubber sealant into position and lock the wiring compartment.

7. Pull the bracket lock and attach the lamp body to the fixed mounting bracket.

8. Turn on the main switch and the lamp will light up immediately and the installation will be completed successfully.

The post How to Install LED Flush Mount Ceiling Lights appeared first on Lepro Blog.

The installation guide is for 12V LED strip light kit. LED strip Lights are great for decorating your home. Its simple and superb design can embellish the color of the home stereo space and enhance the atmosphere.

Now you can watch the video or follow the steps below to check how to install, cut and connect LED strip lights.

Part 1. How to Install LED Strip Lights

Part 2. How to Cut LED Lights Strip

Part 3. How to Connect LED Strip Light Sections

Part 1. How to Install LED Strip Lights?

Step 1. Dry and clean the surface

Before adhering any strip lights, clean the surface of the area you will be placing the lights on. This is vital to keeping it mounted for a long time to come. It is recommended to apply your strip lights on smooth stable surfaces. It should not be placed on rough or textured surfaces or any surfaces that can bend or move.

Step 2. Unroll the light strip, stick to the surface

The LED strip lights come rolled on a spool. Simply unroll the length of lighting you will be working with, remove the adhesive backing and stick to the desired surface. Press down on each part of the strip so it is firmly adhered to the surface and has no air bubbles.

You can use fixing clips to strengthen the strip light’s installation and ensure they stay in place. Peel off the adhesive tape and apply it to the surface with the non-sticky area over the strip light.  If you choose, you can secure the clip further by screwing it to the surface.

Notice: Not all of the LED strip lights on lepro.com are equipped with the fixing clips, please check the new models if needed.

Step 3. Connect LED light strip and turn on the light

Once your strip lights are secured, you can attach it to the controller and power adapter, then plug it into an electrical outlet. Using the remote control, remove the insulation sheet first, press any color on the remote control to change the lighting color.

Part 2. How to Cut LED Lights Strip

Each strip light has special designated sections where you can cut the strip. Be sure to make a clean straight cut only in these designated sections. Cutting it in a non-designated area will damage the strip lights.

Part 3. How to Connect LED Strip Light Sections

Did you know you can design your strip lights to make twists and turns, go around corners or even over non-flat surfaces? Use the corner or straight flexible connectors and connector clips.

To join two strip light sections together, use a connector clip. Push the open end of each strip into the clip, then close it to lock it in.

To make your light strips go around a corner, use one corner connector and 2 connector clips.

You can even make your strip lights go over uneven surfaces if you need to. Connect a flexible strip connector to the strip lights and over the uneven area. Connect the other end to the rest of the lighting.

Now you can feel free to change and choose the light color atmosphere you want. If you use a remote control, don’t forget to unplug the battery insulation sheet before use.

For rough surfaces, you may need to install mounting clips to keep the strip light stable. For moist places like bathrooms, waterproof strip lights are recommended. And now you can check the LED strip lights category to get more.

The post How to Install LED Strip Lights – Easy to Follow Installation Guide appeared first on Lepro Blog.