A driveway is a long stretch of land that leads up to a building. There are many reasons why we need lights on the driveway. One of the most important point is that customers not only can use light to find the parking spot, but also can stop them from bumping into other cars or people.

A driveway light, also known as a pathway light, is generally installed at the edge of the road to illuminate the path. This type of light is often mounted on an existing pole or wall that is on the edge of the property. The pole or wall typically has a mounting bracket that need to be screwed into the side of it to hold the light.

Key Points to Choose the Best LED Shoebox Lights for Driveways

Parking lot lighting should be installed in such a way that it not only provides adequate illumination, but also does not dazzle the drivers. There are a few factors to take into consideration when buying a light.

Consider the Energy Efficiency Metrics

What is the energy efficiency metric? Most people will answer with how many units of energy they use per unit of revenue, but these metrics only tell you about the total amount of money has been spent. The more important question is “How much energy are you saving, and how does it compare to your revenue?” Energy efficiency metrics are the measurements of energy consumption in relation to its use. They are used as a measure to determine if an energy-using process is economically efficient.

Lux Required for Lights in Driveways

There is no specific number of lux that is required for lights in driveways to be effective, but it depends on your needs. Usually the lights in driveways are not too bright, which means the light is bright enough to illuminate the night activity in the dark and not affect people’s vision while driving. In a general way, the lights with around 30 or slightly less lux would be suitable.

The amount of light needed for a driveway depends on the size of the driveway and how many lights you have. If there are trees, or shrubs in your driveway, then you will need more light. The size of the driveway can be determined by measuring the length and width.

Anti-Glare

It is an imperative feature as glare can make the driver feel dazzled and put the safety of other drivers at risk.

Photo Sensor of Parking Lot Lights

A photocell is a device that generates an electric current when it is exposed to light and uses the energy from this current to power an electronic circuit.

Lepro LED parking lot lights offer photocell sensor controls to automatically power on and off the LEDs from dusk to dawn, making energy-saving a reality. If not required, we can additionally offer you a shorting cap to turn off this function.

Mounting Types of Light

There are multiple types of LED Parking Lot Light mounts, including the Pole Mount and the Surface Mount. A Pole Mount is installed on a pole that has an arm that extends out into the ground. The arm is then sunk into the ground and made to hold up a weight that balances the LED light. The Surface Mount is mount directly on the existing wall with U bracket or Trunnion bracket.

Light Distribution Types of LED Parking Lot lights

The light distribution type of LED parking lot lights is designed to provide adequate illumination for the parking lot, while minimizing the amount of light pollution that would result from other traditional lighting solutions.

Type I provides a good lighting for fixtures located mid-way up the driveway.

Type II is a slightly wider variation and is intended for installations where the fixture is positioned at the edge of the driveway.

Type III fixtures stand about 2.75 times the height of the mounting surface.

Type IV fixtures are asymmetric (where one light is taller than the other), and this effect creates a multi-directional flood of light, with little light falling behind the fixture. These floodlights also produce more rounded patterns than their Type III counterparts which push outwards rather than downwards.

Type V fixtures are omnidirectional lights. They distribute light in a uniform square or circle around the fixture.

After learning how to choose parking lights, now I want to introduce the LED parking lot lights from Lepro. There are four different power options: 100W, 150W, 200W and 300W. Now you can take a look and find one that is perfect for your driveway.

The post How to Choose Parking Lot Lights for a Driveway appeared first on Lepro Blog.

Are you spending hundreds of dollars on replacing the lights installed at your place of business? The number one issue faced by all industrial and commercial businesses/concerns, in addition to the high prices of light fixtures, is the much higher and exorbitant costs involved in installing and maintaining them. 

But not to worry, here’s presenting before you the Lepro LED High Bay Lights. Our lights come coupled with a 5-year warranty. Under 77°F (25°C) when worked for 8 hours a day, the light’s life expectancy is approximately 27.4 years. Our lights are backed by the UL and DLC certifications, ensuring high quality and performance.

But is that really enough to reduce the maintenance costs? The answer is No. Let’s now get into the specifics of how the lights are structured. 

How to Lower Maintenance Costs with Lepro LED High Bay Lights?

1. Lumileds 2835 LED Chips

The Lumileds 2835 LED chip, backed by intellectual property protection, is the superior Lepro UFO lighting solution. Thanks to its 70% derating usage of LED modules and its excellent heat dissipation from up to 40 radiating fins, the Lepro LED UFO High Bay Light can achieve up to 145 lumens per watt. This means that a traditional 1,000 watt metal-halide UFO light can be replaced with Lepro’s 240 watt UFO High Bay Light, saving energy costs up to 70%.

As you can see in the table and chart below, calculated by the TM21 report, the lifetime of the L80B50 LED module can reach up to 40.4 years when working 8 hours per day at temperatures of 77 °F. That’s a long time of not worrying about replacements!

2. Premium Grade LED Drivers

In addition to Lepro’s UFO fixtures themselves, the drivers in our UFO fixtures are also UL and FCC certified. This means you, our customers, receive high-quality, reliable, and satisfying premium-grade products.

Key components, such as the E-cap used in Lepro’s drivers, are also high quality. We have chosen the premium-grade E-cap brand Aisha as our supplier to ensure superior performance even under high temperatures and the longest lifetime possible. 

Lepro’s LED UFO High Bay Lights come with a 5-year warranty even when using Lepro’s strict standards. As shown in the following chart, the lifetime of our drivers can reach an impressive 27.4 years when working 8 hours per day in temperatures of 77 °F.

3. Durable Housing

Aluminum die-cast housing is used in all of Lepro’s LED UFO High Bay Lights to ensure maximum durability and excellent heat dissipation.

The streamlined design of Lepro’s LED UFO High Bay Lights also helps lower the air resistance to reduce the internal temperature. The 40 radiating fins improve heat dissipation as well.

4. Reliability Test:

Thermal Shock Test

To test the impact of intense temperatures on the Lepro LED UFO High Bay Lights over time, our fixtures are subject to a chamber heated to 176 °F for 1 hour, followed by a chamber chilled to -22 °F for another hour. After 500 cycles, our product survives and continues to work well, passing the test with flying colors.

Temperature-Humidity Bias Test

The temperature-humidity bias test conducted on the Lepro UFO High Bay Light helps to evaluate their performance under both high temperatures and high humidity. In this test, our fixtures are subject to a chamber of 122°F and 93% relative humidity for 500 hours. After this test, our products continue to work well.

100% Aging Test

And each batch of Lepro LED UFO High Bay Light must pass a mandatory 4-hour aging test with a variable voltage ranging from 90 to 305 volts before being shipped out.

Additionally, with UL, FCC, and DLC 5.1 certified, we are proud to announce that the Lepro LED UFO High Bay Lights offer an outstanding 5-year warranty even under ambient temperatures of 104 °F. The expected lifetime of these lights can even go up to 27.4 years when working 8 hours per day in conditions of 77 °F.

Now check here to try out the Lepro LED UFO High Bay Lights. Our professional support team will get back to you as soon as possible. 

The post How Do Lepro LED High Bay Lights Save $Hundreds on Maintenance Costs appeared first on Lepro Blog.

Part 1. Registration

Part 2. Login

Part 3. Place Orders

1. Registration

Whichever page of the website you are currently on, you can click “Register” in the upper right corner to enter the registration page. Business customers can directly click: https://www.lepro.com/btwob/account/create/ to start registration; if you need to register a personal account, please go to https://www.lepro.com/customer/account/create/ to register.

1.1 Business Account Registration

If you are a business customer, you can enjoy a 10% discount on lepro.com after successfully registering. As you spend more on the website, you can get a higher level of discount when you reach a certain amount.

For a business account registration, just fill in the relevant information as prompted on the page. It should be noted that business customers are also divided into three categories: Contractors and Designers, Business End Users and Retailers. Please choose the category that reflects your actual situation:

1. Contractors and Designers: companies or enterprises that purchase Lepro products for contracting projects.
2. Business End Users: companies or enterprises that purchase Lepro’s products for their own use.
3. Retailers: companies or individuals wishing to become Lepro offline retailers.

Contractors and Designers customers can provide their corresponding tax exemption certificate. After passing a review, they can be exempted from tax when shopping on lepro.com.

If you are registering for a “Retailer Account”, please fill in your business-related information in the corresponding box. We will review it within 24 hours. You will be notified by email whether your application is approved or not.

1.2 Personal Account Registration

You can also switch to register a personal account. Personal account registration only requires that you fill in your name, email address, and account password in the corresponding boxes to successfully register. After successfully registering, you will receive a confirmation email.

2. Login

If you have already registered a lepro.com account, click “Login” in the upper right corner of the page to enter the login interface.

Here you can fill in your email address and password to login successfully. If you have accidentally forgotten your password, you can click “Forgot Password” below to reset your password.

3. Place Orders

If you have a business account, you can enjoy the corresponding discount after logging in, so please remember to login before placing an order.

Step 1. Add to Cart

On the product details page, click “Add to Cart” to put your favorite products into the shopping cart, and enter the required quantity in “QTY”.

Step 2. View the Shopping Cart

After adding items to the shopping cart, you can see the products you have added in the shopping basket in the upper right corner. At this time, you can click “View Cart” to view the information of the shopping basket, or you can directly click “Secure Checkout” to settle the payment.

On the shopping cart page, you can see the price of the items added to the shopping basket. If you have a coupon, you can enter it here. The required shipping and taxes will also be shown here. When the purchase amount of each order exceeds $39, you can enjoy the Free 2 Day Shipping service; if a single order amount is less than $39, you need to pay an additional $3.99 to qualify for the 2 Day Shipping service.

Step 3. Payment

Next, you can directly click “Checkout with Paypal” to pay with Paypal, or click “Secure Checkout” to select other payment methods. We accept Credit Card or Debit Card, Paypal, Resolve and other payment methods. Please fill in the shipping address and payment information by following the prompts, and finally click “Place Order” to successfully place the order.

The above covers the whole process of registering, logging in and placing an order on the lepro.com website. If you encounter any problems during this process, please feel free to contact our customer service team: cs@lepro.com, or call + 1 866-287-2558 (Mon-Fri 9:00-18:00 EDT). We will endeavor to resolve your problem as soon as possible. Enjoy shopping!

The post How to Register, Login and Shop on Lepro.com appeared first on Lepro Blog.

1. What is UL?

   UL is short for Underwriter Laboratories Inc. UL safety laboratories hold the highest authoritative power in the United States. UL is also among the largest private institutions conducting safety testing and accreditation in the world.

2. What is ETL?

   ETL is short for Electrical Testing Laboratories. ETL was founded by the American inventor Thomas Edison in 1896 and enjoys high repute both within the United States and around the world.

What is UL Certification?

The UL mark is usually labeled on the product and/or product packaging to indicate that the product has passed UL certification and meets safety standard requirements. There are three common UL safety marks for different types of UL services:

1.UL Listed

This is mainly used for general end-use products that consumers can buy directly from markets, such as home appliances, computers, heaters, fuses, power supply boards, smoke detectors, and fire extinguishers. If the final product needs to be marked with UL Listed, UL should test the product sample to confirm that there are no hidden fire and electrical hazards. Any product marked with UL Listed indicates that a representative sample of the product meets the relevant UL safety standards. This safety mark series includes three different marks for the United States, Canada, and the United States and Canada.

2.UL Recognized

UL Recognized is primarily a safety certification for components and materials. The accredited components will be used in assembling the finished product. The components must meet the relevant approval conditions before they can be used in the corresponding finished products. Examples include: switches, power supplies, printed plates, transformers, wires, plugs, and plastic materials, all of which are subject to approval.

3.UL Classified

A product that has specific hazard risks, specific attributes, or limited or special conditions of use, even if it is a legally regulated product, needs to be labeled with the UL Classified mark. The classification is primarily for building materials and various kinds of fire protection equipment and marine equipment. The classification mark involves one or more of the following requirements: specific risks, such as casualty, death, or fire; performance under specific conditions; specific regulations and requirements; and specific standards. Common products include fire doors, fire hydrants, medical equipment, and ice machines.

What is ETL Listed?

Like UL, ETL can test and issue ETL certification marks in accordance with UL standards or American national standards. It can also issue composite certification marks in accordance with UL standards or American national standards and CSA standards or Canadian standards. Any electrical, mechanical, or electromechanical product that carries the ETL mark indicates that the product has met the minimum requirements of the United States and Canada’s general product safety standards and has been tested to confirm that it meets the relevant product safety standards.

UL and ETL’s services are based not only on American standards but also Canadian standards. The letters “US” on the bottom-right of the mark indicates that it is applicable within the United States; the letter “C” at the bottom-left indicates that it is applicable within Canada, and a mark that contains both “US” and “C” on both sides indicates that it is applicable within both countries.

UL VS ETL

The main difference between products listed by UL and ETL is that ETL does not create its own certification standards. UL develops standards used by other organizations, including ETL.

Both are Nationally Recognized Testing Laboratories (NRTL). They act as independently-run, non-governmental laboratories. In addition, they are recognized by the Occupational Safety and Health Administration (OSHA) as laboratories suited for testing products according to safety standards.

What are the risks of using products without UL/ETL certification?

UL and ETL standards protect users from potential fire, electric shock, and personal injury hazards. UL/ETL has developed standard codes for various safety levels based on their tests for various products, external power supplies, and charging accessories. Many manufacturers produce products or purchase parts that have not passed UL/ETL certification to save on costs. This actually harms the safety of consumers.

When you purchase high-risk products, such as 110V products, you should take care to check if it has passed UL/ETL certification. If not, you are recommended to stop using the product to avoid accidents such as fire or electric shock.

Lepro produces a wide variety of products including LED high bay lights, LED shop lights, LED parking lot lights, LED tube lights, and LED recessed lights, which are suitable for various commercial and industrial lighting uses. All of them have passed UL or ETL certification, so you can buy and use them with a peace of mind.

The post Why Do We Choose UL/ETL Certified Products appeared first on Lepro Blog.

With the development of LED technology, LED lights have become more and more commonly found in working and living environments. If you are asking whether you should replace traditional fluorescent lights with LED lights, my answer is certainly yes.

First of all, LED lights are more energy-saving and power-saving. For example, the Lepro 40W LED shop light is equivalent to a 100W fluorescent shop light, which saves 60% on electricity bills.

Secondly, compared to fluorescent shop lights, LED shop lights have lower long-term usage costs. Although the purchase cost of LED shop lights is higher, it has a service life of up to 50,000 hours, are more durable than fragile fluorescent shop lights, do not require frequent replacement and installation, and are highly cost-effective.

In addition, fluorescent shop lights tend to emit the buzzing sounds of electric current or flickering light after long-term use, while LED shop lights will not give off such signs that are unkind or unsafe to the eyes.

As fluorescent shop lights contain mercury, which is harmful to human health and pollutes the environment, it is necessary to pay special attention when recycling them. On the other hand, LED shop lights are green and environmentally friendly and do not cause any pollution.

Therefore, many people have now replaced traditional fluorescent shop lights with LED lights. Here, we recommend two solutions. One is to replace fluorescent shop lights with brand-new LED shop lights, and the other is to buy LED tube lights, replace the fluorescent tubes, and re-wire the lights.

Best LED Fluorescent Shop Light Replacement

If you choose to replace fluorescent lights with LED shop lights, here we recommend the Lepro 42W 4-Foot LED Shop Light. The output brightness is 4200 lm, which is equivalent to 100 lm/W. It is suitable for lighting places such as garages, basements, workshops, supermarkets, and warehouses. If necessary, up to eight lights can be connected in series. The light comes with a five-year warranty and has passed ETL certification, so it is safe to use. In addition, there are opportunities to receive government energy subsidies to save on purchase costs.

How to Convert Fluorescent Shop Light to LED?

If you bought LED tube lights to replace fluorescent shop lights with, you must first confirm the tube light model purchased, such as Lepro Double Ended Power Type B T8 4ft LED Tube Light. You will need to remove the ballast and re-wire to use.

If you bought Type A LED tube lights, this is a plug-and-play light and does not need to be re-wired, but it will be more expensive in terms of cost. At the same time, you will need to consider the problem of ballast adaptation.

Watch the video below to learn the detailed steps of installing LED tube lights.

We have introduced two solutions for replacing traditional fluorescent shop lights in the above. You can choose to use LED shop lights or LED tube lights according to your needs.

The post LED Shop Light VS Fluorescent Shop Light appeared first on Lepro Blog.

1. Are there any LED flood lights that can light up my backyard?

   Of course. There are many LED flood lights on the market that can be used for backyard lighting in homes or industrial venues, but whether it can meet your backyard lighting needs depends on the area size of the backyard that needs to be illuminated, and whether the chosen LED flood light can provide sufficient illumination.

2. What size LED flood lights are needed to light up my backyard? How many LED flood lights do I need for my backyard?

   Firstly, you need to measure the area of the backyard that needs to be illuminated. If the illumination area is large, think about whether you need to install multiple lights. Secondly, pay attention to the relevant parameters when choosing LED flood lights, such as power, brightness, color temperature, and beam angle. If you need to illuminate a large factory backyard area, we recommend that you import the light’s IES file into a professional lighting design software (such as Dialux) for the calculation to obtain more accurate lighting suggestions and solutions.

Recommend the Best Outdoor LED Flood Light for Yard

To meet different lighting needs, Lepro provides LED flood lights with different powers, so you can find a suitable model for different uses, whether for home courtyard lighting or factory backyard security lighting. In addition, Lepro LED flood lights use durable commercial grade die-cast aluminum housing and heat-resistant and impact-resistant tempered glass, has a protection grade of IP65, has passed ETL & FCC certification, and has a service life of up to 15,000 hours. You don’t have to worry about any quality or safety issues when using it in your backyard or other outdoor venues.

The following are lighting suggestions for Lepro LED flood lights of different powers for reference.

In addition to security lighting, LED flood lights can also be used for decorative lighting. Here, we recommend Lepro RGB LED Flood Light. You can create a different atmosphere in your backyard by adjusting the color and blinking mode and speed.

How to Install LED Backyard Flood Light

Lepro LED flood lights are very easy to install with 360-degree adjustment capability. You can install them on the ground or on a wall in your backyard. Check out the video below for detailed installation steps. And you can also get detailed tutorial on how to install LED flood light for yard.

The post How to Choose the Best LED Flood Light for Backyard appeared first on Lepro Blog.

With the development of the lighting industry, LED shop lights have become one of the most common commercial lighting fixtures. What is required of commercial lighting, and why should you choose LED shop lights?

• Safety. When providing lighting for any commercial area, safety is definitely the most important consideration. Compared to traditional light fixtures, LED lights are much safer, more eco-friendly, and do not produce any harmful substances. There is also no need to worry about eye-straining flickers or humming sounds after prolonged usage.
• High brightness and great color rendering. Light fixtures with high brightness are typically used for commercial lighting to improve efficiency. Also, places like supermarkets require lights with good color rendering. Undoubtedly, LED shop lights provide excellent brightness output and color rendering performance. They possess high luminous efficacy, can emit sufficient lumens, and have Color Rendering Index (CRI) values that are usually higher than 80.
• Long lifespan. Commercial spaces usually go for lighting solutions with longer lifespans, which reduces the frequency of replacing them, thus saving on costs. LED shop lights can last as long as 50,000 operating hours, giving more value for money than traditional lights.

So how should you go about choosing LED shop lights suitable for supermarkets, offices, or other commercial spaces? Let us introduce you to five different brands of LED shop lights for your consideration.

Best Commercial LED Shop Lights for Supermarkets, Shops, Offices, Display Areas, etc.

Best commercial electric 4ft LED shop light list:

1. Lepro 40W 4 Foot Linkable LED Shop Lights
2. EnviroLite 4 ft. 2-Light White LED Shop Light
3. Commercial Electric 4 ft. LED Linkable Shop Light
4. Honeywell 4ft. Commercial LED Shop Light
5. Metalux Commercial LED Shop Lights

1. Lepro 42W 4 Foot Linkable LED Shop Lights

From supermarkets to malls to offices, the Lepro 42W 4-foot LED shop lights are highly suitable for the lighting needs of all types of commercial spaces. 

High Brightness: The 42W Lepro LED shop lights are equivalent to traditional 100W fluorescent lights, with an output of 4,200 lumens, a color temperature of 5,000K, and great color rendering with CRI > 80. It ensures that the commercial space will be well-lit and even helps save 60% on electricity bills.

8 Units Max Connect: Up to 4 units of this shop light can be connected. Suitable for larger spaces.

Durable: Comes with ETL safety certification and a 5-year warranty.

Easy Installation: The Lepro LED shop lights package includes all accessories needed for easy installation, including hooks, hanging chains, mounting screw packs, and connectors.

Energy Star Listed: Get a chance to receive government energy rebates and save on purchasing costs. Business users will also get additional discounts.

2. EnviroLite 4 ft. 2-Light White LED Shop Light

Energy-saving: The EnviroLite 28W LED shop light comes with two T8 light tubes that emit 3,600 lumens. The color temperature is 5,000K daylight white and helps save 30% on electricity bills compared to traditional fluorescent lights.

Safety-certified: Uses high-quality LED chips. UL-listed and can be installed in damp spaces.

Quality Assurance: Light encased with a protective white enamel finish. Up to 50,000 hours of continuous use and comes with a 5-year warranty.

3. Commercial Electric 4 ft. LED Linkable Shop Light

Easy Installation: This shop light can connect up to nine units. The package includes connectors, a five-foot power cord, and linking cables. Extremely lightweight and can be suspended easily with chains. Easy to install and maintain.

High-efficiency Energy Savings: 35W, 4,000K bright white LED shop light emits 3,200 lumens of brightness, equivalent to 64W traditional fluorescent lights.

Long Lifespan: The Commercial Electric LED shop light can be used continuously for 50,000 hours and comes with a 5-year warranty. Suitable for household or commercial areas such as garages, storage rooms, utility rooms, or workshops.

4. Honeywell 4′ Commercial LED Shop Light

High Brightness: The Honeywell Four-Foot. LED Linkable Shop Light has 50W power, emits 5,000 lumens, and has high luminous efficacy.

Choice Commercial Lighting: Color temperature of 5,000K, daylight white, CRI = 80. suitable for supermarkets, stores, officers, and other commercial spaces.

Linkable: Up to 10 units can be connected. The package includes all accessories needed for installation (chain, cord, mounting hardware.) Easy to operate.

5. Metalux Commercial LED Shop Lights

High Luminous Efficacy: The Metalux 43W 42-in. White Integrated LED Shop Light emits 4,500 lumens to ensure ample brightness for better safety and productivity.

Durable: Uses LED technology, provides up to 50,000 hours of continuous use. Comes with a five-year full warranty for worry-free use.

Easy Installation: The light fixture is pre-assembled. Simply suspend or install at the desired location and plug into a power source to use. No additional cables are required.

Based on your needs, you can take your pick from the 5 commercial LED shop lights introduced above. We recommend the Lepro 40W 4ft Linkable LED Shop Lights as it provides excellent value for money and is suitable for various commercial lighting needs. You can check out more details here.

The post Top 5 Commercial LED 4ft Shop Lights Review in 2024 appeared first on Lepro Blog.

1. Illumination. Industrial sites commonly have high ceilings. As the height increases, the degree of illuminance gradually weakens. In order to meet the needs of industrial lighting, lights with stronger illuminance such as LED high bay lights should be selected. Even if suspended above 20 feet, they can ensure adequate lighting.

2. Durability. Industrial sites tend to have relatively harsh production environments, such as in flammable or humid locations. Production safety must be guaranteed. Therefore, more durable lamps must be used. Compared with traditional fluorescent lights or metal halide lights, LED lights can last longer and are safer.

3. Cost. In setting such as factories, most lights are purchased in batches. As such, cost is a very important consideration, not only in terms of purchase cost, but also in terms of installation cost, replacement cost, and energy cost.

LED high bay lights are one of the most popular lighting options for industrial lighting. They are highly suitable for illuminating sites such as factories, warehouses and workshops. Next, we are going to introduce some industrial LED high bay lighting fixtures for your reference.

Top 5 Industrial High Bay LED Lighting Fixtures

1. Lepro Dimmable UFO LED High Bay Light

Lepro offers several types of UFO LED high bay lights with different powers, which are suitable for hanging from ceilings of different heights. The appropriate model can be selected according to specific needs.

Energy saving: using Lepro LED high bay light can save more than 60% of your energy bills. A 100W LED high bay light is equivalent to a 300W metal halide light, a 150W UFO LED high bay light is equivalent to a 400W metal halide light, and a 240W LED UFO high bay light is equivalent to a 600W metal halide light. At the same time, you can use it with a 1-10V dimmer to adjust the brightness of the light as needed.

Durable: The dust-proof and waterproof grade is IP65, so it can be used in dusty or humid factories. The products have passed UL certification, and the quality is guaranteed. The service life is 50,000 hours. There is also a 5-year warranty.

Easy to install: The industrial high bay lighting fixtures are equipped with lifting rings, which can be directly hung with hooks, and are very easy to install.

2. VCMAG Industrial UFO LED High Bay Lighting

High luminous efficiency: a 150W VCMAG UFO LED High Bay Light is equivalent to 600W HID/HPS. The output brightness is 21000LM, equivalent to 140LM/W, which can save 80% of your energy bills.

Large beam angle: VCMAG industrial bay lights adopt a 120 degree large beam angle design, which can cover a larger area. 5000K daylight white has natural light, has no flicker, protects eyes from harm, and ensures production efficiency.

Long service life: The built-in hollow-designed heat sink die-cast aluminum shell and transparent cover ensure that this industrial high bay LED lights has good heat dissipation. In addition, it has a long service life of over 50,000 hours.

3. Adiding Industrial High Bay LED Light Fixtures

High luminosity: 200W Adiding High Bay LED Light built-in 448pcs SMD LED chip, output 30,000LM, luminous efficiency up to 150LM/W, equivalent to 900W HPS/HID.

Multiple installation methods: The Adiding industrial LED High Bay kit comes with multiple accessories, including hooks, safety ropes and freely rota table brackets, to help you install them in an easier way.

Good heat dissipation: It uses an impact-resistant die-cast aluminum shell, hollow design and ultra-thin light-emitting surface, and provides faster and better heat dissipation. It can protect the light to ensure a longer service life.

4. Vemofoper Industrial LED High Bay Light Fixture

Efficient light emission: 100W Vemofoper LED High Bay Light can output 14000LM, the luminous efficiency is 140LM/W, the beam angle is 120°, 5000K daylight white. It can replace 400W HPS/HID.

Quick installation: Vemofoper high bay industrial LED lighting is equipped with a UL-certified 5-foot power cord and 110V standard American plug (if you don’t need the plug, you can ask a professional to cut it). Fast installation, saves time and energy.

Good durability: It is made of pure aluminum, providing the light with better heat dissipation. It can ensure a service life of more than 50,000 hours, and avoid the cost of repeated replacement.

5. TREONYIA Industrial UFO LED High Bay Light

Energy-saving and power-saving: TREONYIA provides industrial high bay lighting fixtures with different powers, suitable for different installation heights, and suitable for different industrial lighting scenes. 100W output 14,000LM, equivalent to 140LM/W, high luminous efficiency, saves energy bills.

Easy to install: TREONYIA UFO LED High Bay Light is equipped with a 5’cable with pre-installed rings, four-strand safety rope and UL-certified US standard plug. Just hang it where you need it, plug in and go!

5-year warranty period: There is a 5-year warranty period. It has passed ETL, DLC, CE, FCC and ROHS certification, and is safe and reliable to use.

In the above, we have introduced 5 industrial high bay LED lights. If you need to install lighting fixtures in factories, workshops, warehouses and other places, you can compare and choose the right one. Lepro LED high bay lights are recommended here, click to see more product details.

The post Best Industrial High Bay LED Lights appeared first on Lepro Blog.

LED flood lights are one of the most widely used light sources both indoors and outdoors, and provide even illumination that washes across an entire area. They are very commonly used in night lighting and as part of the decorations of a place. This is especially the case for the RGB color changing LED flood lights, and with just a change in color, one can completely change the atmosphere of a place. As such, color changing LED flood lights are seen at wedding ceremonies, holiday parties, as well as part of the landscape decorations, where they are the background lighting of choice.

Below is an introduction to 5 of the most popular outdoor colored LED flood lights for your consideration.

Top 5 Outdoor Color Changing LED Flood Lights

1. Lepro RGBW LED Flood Light with Remote Control
2. ChangM LED Flood Lights RGB Color Changing
3. Onforu 20W RGB Flood Light
4. USTELLAR 2 Pack 25W Color Changing Floodlight
5. ILC LED Flood Light

1. Lepro 50W RGB LED Flood Light with Remote Control

Lepro provides 15W and 50W RGBW LED Flood Lights, with the Lepro 15W RGBW LED flood light outputs 1200 lumens, while the Lepro 50W RGBW LED flood light provides 4000 lumens. Which model is more appropriate is dependent on your needs.

Lepro 15W RGB LED Flood Light

RGB+White: The product is equipped with a remote control, and provides 7 adjustable light colors, including daylight white. Additionally, you can also adjust the brightness, as well as turn on flashing mode and control the speed of the color change. With these options, you can easily create different lighting effects.

IP65 Waterproof: Lepro LED multi-color floodlights are made from a waterproof material, so you can safely install them in your garden, backyard, by poolside or other outdoor places.

Memory Function: When you once again switch on the LED flood lights, the light will automatically default to the color and mode that was set before it was turned off.

Quality Assurance: This product has obtained ETL certification, and comes with a 2-year warranty period. Product quality is guaranteed.

2. ChangM LED Flood Lights RGB Color Changing

Bluetooth Connect & App Control: After connecting with Bluetooth, you can use an app on your mobile phone to control the lights, including changing the light color and the mode.

16 Million Colors and 20 Modes: Open up the mobile app and you will be able to select the color of the light (including warm white) and 20 flashing modes.

IP66: The product has an IP66 protection rating, so rest assured that this color changing LED flood light can be used in the rain or snow. Whether you choose to place it in the garden, backyard, aisle, porch or driveway, it is an extremely practical choice.

Music Mode: After selecting music mode, ChangM LED flood light is able to access the music files in the app or catch the rhythm of background music, and switch the light colors according to the rhythm of the music.

3. Onforu 20W RGB Flood Light

16 Colors: Onforu RGB LED Flood Light provides 16 colors and 4 modes to choose from, with a remote control provided to adjust the brightness.

Easy to Install: All you need to do is to connect it to the power supply, no wiring is required. The colored outdoor led flood light fixture can be adjusted 180°, so it is very convenient to install and use, whether it is on the ceiling, the ground or the wall.

IP66 Waterproof: The product has an IP66 protection rating, and it is made of die-cast aluminum shell, making it highly durable. It is suitable for use both indoors and outdoors, under rain and snow.

4. USTELLAR 2 Pack 25W Color Changing Floodlight

DIY Color Adjustment: While USTELLAR Color Changing Floodlight provides a default selection of 20 colors, there is also a DIY button on the remote control for your to customize your own light color.

IP66 Protection: LED color changing flood lights are usually installed in outdoor places such as gardens, backyards, roadsides, etc. The IP66 protection rating ensures that the lights can work normally in bad weather.

Durable: Its aluminum shell allows for good heat dissipation, and it has a service life of up to 50,000 hours, with a 3-year warranty.

5. ILC LED Flood Light

Smart Operation: You can control the color, mode, brightness, and other aspects of the light on your mobile phone app by connecting it to your phone’s Bluetooth. If multiple color changing LED flood lights have been installed, they can be adjusted and controlled simultaneously.

Timer Mode: Set an ‘on’ or ‘off’ time through the mobile app and once this is done, the LED flood light will be automatically turned on or off every day without the need for manual adjustment.

Peace of Mind: ILC RGBW Outdoor Smart Floodlights provide a 2-year warranty and a 90-day money-back guarantee.

With this, you now have an idea of the 5 most popular color changing LED flood lights, and can choose the appropriate one to install for your porch, backyard, balcony, terrace, garden, as well as other outdoor or other indoor environments. Whether for lighting or decoration, all are very excellent choices.

The post Best Outdoor Color Changing LED Flood Lights appeared first on Lepro Blog.

In addition, there are different types of LED tube lights. Type A LED tube lights are plug-and-play lights, Type B LED tube lights require removal of ballasts, while Type C LED tube lights operate with an external driver. As different types of LED tube lights vary in installation and usage methods and in costs (Type B has a relatively low purchase cost), you can choose the right type depending on your needs and budget.

LED lamps are well known to last longer and be more energy-efficient, safer, and more environmentally friendly than fluorescent lamps. But how do we choose the right LED tube light fixture? Here are 5 popular LED tube lights for you.

Best 5 LED Tube Lights for Home, Office, Supermarket, and More

List of Best 5 LED Tube Lights in 2022

1. Lepro 25 Pack 17W T8 4ft LED Tube Light
2. Philips UniversalFit LED Tube Lights
3. toggled LED Tubes
4. Great Value LED Light Bulb
5. Sunco Lighting 8 Pack 4FT 48 Inch T8 Tube LED Light Bulbs

1. Lepro 25 Pack 17W T8 4ft LED Tube Light

This Lepro T8 LED tube light is a Type B double-ended lamp that can directly replace the existing fluorescent lamp after removing the ballast.

• Safety certified: UL safety certified with a 5-year warranty, up to 50,000 hours of service life, and safe use guaranteed.
• DLC certified: You have the opportunity to get DLC rebates, which will reduce your purchase cost substantially.
• Energy-efficient: The tube light provides 17W, 2200 lumens of brightness, equivalent to 129 lm/w, a color temperature of 5000 K, and Daylight White light and is energy efficient for lower electricity costs.
• Cost-effective: One pack contains 25 tube lights at $5.6 per unit, which is very good value for money.

Lepro 25 Pack 17W T8 4ft LED Tube Light

2. Philips UniversalFit LED Tube Lights

• The Philips 16W T8 Universal Fit LED Light Bulb is equivalent to a 32W traditional fluorescent lamp with 106 lm/w, saving 55% on your electricity bills.
• Available in multiple colors. Philips offers three colors: bright white, cool white, and daylight white.
• 36,000-hour lifespan, preferred in kitchens, garages, and commercial lighting scenarios including offices and hospitals.
• A pack of 2, 10, or 30 is available at different prices. For example, a pack of 2 daylight white LED tube lights is priced at $17.60, which is $8.80 per unit.

3. toggled LED Tubes

• 16W toggled LED tubes can be used to replace 28W- 40W T8 and T12 fluorescent lamps. It provides 2000 lumens of brightness, equivalent to 125 lm/w, and a color temperature of 6500K.
• This dimmable tube requires rewiring upon installation. Installation by a professional is recommended if necessary.
• The product has a service life of 50,000 hours and comes with a lifetime warranty.
• A pack of 2 LED tubes is priced at $22.93, or $11.47 per unit, which is slightly more expensive than other brands.

4. Great Value LED Light Bulb

• As a replacement for 32W-40W T8/T12 fluorescent lamps, the 17W Great Value LED Light Bulb provides soft white lighting, 48 inches in length and a lifespan of up to 44 years. It is not dimmable.
• The product is compatible with most ballasts on the market, but confirmation before installation and usage is recommended.
• Only $8.88 for a pack of 2, or $4.44 per unit.

5. Sunco Lighting 8 Pack 4FT 48 Inch T8 Tube LED Light Bulbs

• The Sunco Lighting 18W 4FT T8 Tube LED Light Bulb, equivalent to a 40W traditional fluorescent lamp, provides 5000K, 2200lm and daylight white lighting. This single-ended light bulb requires removal of the ballast.
• It saves 55% on your electricity bills and has 50,000 hours of life and a low cost of usage.
• Suitable for indoor lighting in stores, offices, garages, warehouses, kitchens, basements, bathrooms and workshops, etc.
• ETL & DLC certified and safety guaranteed. You have the opportunity to receive government subsidies.
• A pack of 8 is priced at $51.99, or $6.50 per unit.

These LED tube lights from five different brands vary in features and you may choose what suits you best according to your needs. But here we recommend Lepro LED tube lights, which are safety guaranteed and are the most cost-effective option.

The post Top 5 LED Tube Lights for Rooms appeared first on Lepro Blog.