Therefore, as a lighting brand that insists on “Reliable & Satisfying”, above all else, Lepro is committed to ensuring the quality and safety of tube lights. Let’s take a look.

Why are Lepro Tube Lights Considered Safe and Reliable?

1. Lepro Tube Lights Certification

2. Higher Quality：LED Replacement Lights for Fluorescent Tube Light

3. Better Experience

4. Widely Application for Lepro T8 Tube Light

5. Rich Compatibility

6. Ring Wave Immunity & High and Low Voltage Start Tests

1. Lepro Tube Lights Certification

Owing to the UL and DLC5.1 certification, Lepro tube lights offer a prolonged lifespan of 50,000 hours and an impressive 5-year warranty. Additionally, our customers can easily apply for rebates.

2. Higher Quality：LED Replacement Lights for Fluorescent Tube Light

In contrast to fluorescent tube lights, the Lepro LED tubes only need about 50% power for the exact same brightness, generating less heat output, thereby prompting others to shift to LEDs.

The premium-grade heat dissipation materials employed within the Lepro tube lights can keep working at a higher temperature than others. Consequently, our tubes may be used both in open and closed fixtures such as troffers and vapor tights.

3. Better Experience

Lepro tube lights do not have a warm-up time and are instant-on lights offering uniform light output.

The 240° angle beam provides a wide light range. Hence, we only need fewer lights to illuminate the entire workshop or room.

4. Widely Application for Lepro T8 Tube Light

The Lepro LED tube light may be used on a variety of occasions, both in dry and damp locations,like garage, workshop, or basement with bright light. It is perfect for various spaces like retail spaces, offices, schools, hospitals, and more.

5. Rich Compatibility

Thanks to the versatile Lepro LED tubes, compatible with most instant-start ballasts, you can easily install our Type A tubes without removing the ballast.

If you have installation experience, you can opt for our Type B tubes after removing the existing ballast, which is simple to operate, has a longer service life, and is not affected by the lifespan of the ballast.

6. Ring Wave Immunity & High and Low Voltage Start Tests.

Besides the stringent tests mentioned in the previous video, we also carry out ring wave immunity tests, high and low voltage start tests.

Post practical inspection, we can tell you:

1. They normally work even under the impact of a 2500 V ring wave immunity test.

2. They can typically work in a voltage range of 94V-300V.

Conclusion

After reviewing the reports, I’m sure you now understand why Lepro is safe and reliable. You are welcome to visit Lepro LED Tube Lights to pick the lights that best suits your needs.Click the picture below to learn more about LED Tube Lights :

The post Why are Lepro Tube Lights Safe & Reliable? appeared first on Lepro Blog.

Introducing before you the Lepro LED tubes, a UL & DLC listed tube light with 50% energy savings, an ultra-long lifespan of 50,000 hours, and a 5-year warranty that will undoubtedly save you hundreds during its lifespan. Now let’s get started!

How to Save Energy & Money with the Lepro Tube Lights

1. Obtained UL and DLC certifications

2. Lower Power Consumption and Heat

3. Lepro Tube Lights Driver

4. Conducted a Range of Accredited Peace of Mind Tests

1. Obtained UL & DLC certifications

Lepro tube lights are UL and DLC certified, assuring strong product safety and performance. Besides, you may easily apply for rebates.

2. Lower Power Consumption and Heat

The LED module is crucial to the lifespan of the tube. Thanks to the rational driver and LED module design, the current running through the LED chip only has 80% of its maximum permissible value, which means Lepro LED tube can achieve as high as 130lm/W lumen efficiency, equivalent to a 32W fluorescent tube. Using the Lepro 17W LED tube with 2200 lumens tube, you can save up to 548 kWh per year.

As evident in the table and chart calculated by the TM21 report below, the lifespan of the LED module reaches a maximum of 23.1 years lifetime at 77°F and works for 8 hours per day.

Hence, with the same brightness, you get lower power consumption and less heating, and employing superior heat dissipation materials, extensively improves the lifespan of Lepro LED tubes.

3. Lepro Tube Lights Driver

E-Cap Is The Key Component In a Driver , Lepro select top-level components and enhance the overall stability through the professional circuit design. As shown in the following chart, Lepro drivers reach an impressive maximum of 74.6 years lifetime at 77°F, and 8 working hours per day.

4. Conducted a Range of Accredited Peace of Mind Tests

To confirm the ultimate performance of Lepro LED tubes and ensure their normal functioning in a special environment, in addition to the lifespan test cited above, Lepro also conducted a series of reliability tests.

1. High Temperature and High Humidity Test

Subject to277V input high temperature at 149 °F (65 °C) and 85% relative humidity, aging for 400hrs, they operate normally.

2. Limit Temperature Test

Placed in a 176°F (80°C) oven for 15 hours, they normally work.

3. Low-temperature Startup Test: Instant on at –4°F (-20°C).

In view of the tests results and professional calculation, we are proud to inform you that the expected lifetime of these lights can go as far as 23.1 years at 77°F (25°C) and 8 working hours/day.

Conclusion

After reviewing the reports, I’m sure you now understand how to save energy and money with the Lepro Tube Lights, Lepro not only has the advantages such as the above, but also It is perfect for various spaces like retail spaces, offices, schools, hospitals, and more.

Click to get more information about Lepro T8 Tube Light.

The post How to Save Hundreds of Dollars with the Lepro Tube Lights appeared first on Lepro Blog.